summary:

The bubble water filling production line is applicable to PET bottled carbonated drinks, soda water, salted soda and other carbonated drinks. The salt steam water filling machine is characterized by scientific and reasonable design, beautiful appearance, complete functions, convenient operation and maintenance, and high degree of automation. Gaseous beverage is a product filled with carbon dioxide under certain conditions, and the carbon dioxide content in the finished product (volume multiple at 20 ℃) is not less than 2.0 times. Carbonated drinks are divided into fruit juice carbonated drinks, fruit flavored carbonated drinks, cola carbonated drinks, low calorie carbonated drinks and other carbonated drinks.

The carbonated beverage is mainly composed of water, syrup and carbon dioxide. The syrup is made through the sugar melting pot and mixing tank. After filtering, it is pumped into the syrup tank in the carbonated beverage mixer. At the same time, the sterilized finished water is also pumped into the water tank in the beverage mixer for degassing to facilitate the mixing of carbon dioxide. Through the proportioning system on the beverage mixer, water and syrup are mixed in proportion to achieve the desired taste, The mixed materials are cooled through the plate heat exchanger. Here, the other end of the plate heat exchanger is mainly connected with the water chiller (providing cold water, in which antifreeze is added, and the outlet water temperature is about - 3 ℃). By this heat exchange method, the materials can be cooled to 0 ℃~3 ℃, and the materials are put into the carbon dioxide mixing tank in the beverage mixer. Under the control of a certain pressure, the carbon dioxide can be fully dissolved in the materials, Make into carbonated drinks.

Equipment features:

1. Bubble water filling equipment is made of 304 high-quality stainless steel, which is corrosion resistant and easy to clean. It is used to produce beverages.

2. All main electrical components of the full-automatic carbonated beverage three in one filling machine are used, such as Siemens, Mitsubishi and Omron.

3. The bubbly water filling machine uses the programmable logic controller PLC to control all electrical components. The circuit is simple, maintenance is convenient, and the action is easy to achieve. The PC operation interface feeds back the operating parameters and conditions of the carbonated beverage filling machine in real time, and monitors the fault outbreak point in real time. In case of problems, it immediately sends out corresponding signals, shuts down for maintenance, and provides corresponding maintenance information.